E1-UM-350      ADUR350

A DUR350 is particularly suited for wear resistant surfacing on Mn-Cr-V alloyed parts, such as frogs, track rollers, chain support rolls, sprocket wheels, guide rolls etc. the deposit is still machinable with tungstene carbide tools.

E1-UM-300      ADUR300

A DUR 300 is indicated for medium-hard surfacing, particularly on structural parts of base materials of higher tensile strength, such as Mn-Mo-alloyed wing and junction rails up to at least 850N/mm2 , e.g. Drive wheels, gear parts, crane wheels etc.

E1-UM-600      ADUR600

A DUR 600 is universally applicable for cladding on parts of steel, cast steel and high Mn steel, subjected simultaneously to abrasion, impact and compression. Typical application fields are the earth moving and stone treatment industry, e.g. excavator teeth, bucket knifes, crusher jaws and cones, mill hammers etc. but also for cutting edges on cold cutting tools, the deposit is machinable by grinding only.

E1-UM-400      ADUR400

A DUR 400 is used for surfacing parts on non-alloy steel and cast steel, subjected mainly to pressure and shock, such as rolls, couplings, stamps, hammers, guide rails etc. the deposit is still machinable with carbide cutting tools and temperature resistant up to 350°C.

E1-UM-350      ADUR350

A DUR 350 is particularly suited for wear resistant surfacing on Mn-Cr-V alloyed parts, such as frogs, track rollers, chain support rolls, sprocket wheels, guide rolls etc. the deposit is still machinable with tungstene carbide tools.

E1-UM-650      ADUR650

A DUR 650 Kb is suitable for cladding structural parts subjected to abrasion combined with impact. The main applications are tools in the earth moving industry and crushing plants as well as cold working tools. The deposit is only machinable by grinding.