E7018 GT

Electrode for high quality and crack resistant joint welding in machine construction, steel fabrication,  boiler construction. also for steels with higher contents of C, P and S. Special coating with low moisture absorption characteristic.

E7016 GT16

Universal electrode for unalloyed and low alloyed steels for industry, light and medium fabrication, in shops or on construction sites, for repairs. Best welding properties in fixed positions.

E7018G GT-G

The basic electrode for crack resistant joint welding, design to give excellent Fracture toughness. Weld metal with high ability of deoxidation and low hydrogen, producing very god weld with a finely rippled bead surface and good slag removal.

E7018 GT1

High quality basic electrode for crack resistant welds, and excellent toughness values at low temperature on unalloyed and lo alloyed steels, high tensile fine grained steels up to -60 °C ship steels.

E8018-B2   GT 8-B2

Electrode for joint welding at boiler and pipe steels and similar CrMo- alloyed pressure-hydrogen resistant steels, especially for the steels 13CrMo-4-5 quality at working temperature up to 550°C .

E7018-A1 GT-A1

Basic type electrode for creep resisting steels and cast steels with 0.5% Mo at temperature up to 500°C. Good weldability in all positions. Smooth bead appearance. Good slag detachment.

E9018G    GT90-G

The basic electrode for crack resistant joint welding, designed to give excellent fracture toughness. Weld metal with high purities and low Hydrogen, producing a clean weld with a finely rippled bead surface and good slag detachability.

E8018-G GT 8-G

A Basic-Coated low hydrogen electrode producing a nominal 0.6% Ni weld metal, designed for welding steels with a minimum yield strength of 450 N/mm2 . This electrode has excellent fracture toughness. All positional electrode producing a finely-rippled bead surface and good slag detachability.

E7028   GT 28

Basic coated electrode with 165% recovery intended for crack resistant welding and high toughness and it is suitable for filling of large and thick section construction steels.

E12018-G GT 120-G

The basic electrode for crack resistant joint welding, weld metal with high ability of deoxidation and with low hydrogen, producing a clean weld with a finely rippled bead surface.